Breaking Change: Strict Function Units

Various built-in functions will become stricter in which units they allow and will handle those units more consistently. This makes Sass more compatible with the CSS spec and helps catch errors more quickly.

HueHue permalink

Compatibility:
Dart Sass
since 1.32.0
LibSass
Ruby Sass

When specifying a color’s hue, CSS allows any angle unit (deg, grad, rad, or turn). It also allows a unitless number, which is interpreted as deg. Historically, Sass has allowed any unit, and interpreted it as deg. This is particularly problematic because it meant that the valid CSS expression hsl(0.5turn, 100%, 50%) would be allowed by Sass but interpreted entirely wrong.

To fix this issue and bring Sass in line with the CSS spec, we’re making changes in multiple phases:

Phase 1Phase 1 permalink

Compatibility:
Dart Sass
since 1.32.0
LibSass
Ruby Sass

At first, Sass just emitted a deprecation warning if you passed a number with a unit other than deg as a hue to any function. Passing a unitless number is still allowed.

Phase 2Phase 2 permalink

Compatibility:
Dart Sass
since 1.52.1
LibSass
Ruby Sass

Next, we changed the way angle units are handled for hue parameters to match the CSS spec. This means that numbers with grad, rad, or turn units will be converted to deg: 0.5turn will be converted to 180deg, 100grad will be converted to 90deg, and so on.

Because this change is necessary to preserve CSS compatibility, according to the Dart Sass compatibility policy it was made with only a minor version bump. However, it changes as little behavior as possible to ensure that Sass interprets all valid CSS according to the CSS spec.

Phase 3Phase 3 permalink

Compatibility:
Dart Sass
LibSass
Ruby Sass

Finally, in Dart Sass 2.0.0 color functions will throw errors if they’re passed a hue parameter with a non-angle unit. Unitless hues will still be allowed.

Saturation and LightnessSaturation and Lightness permalink

When specifying an HSL color’s saturation and lightness, CSS only allows % units. Even unitless numbers aren’t allowed (unlike for the hue). Historically, Sass has allowed any unit, and interpreted it as %. You could even write hsl(0, 100px, 50s) and Sass would return the color red.

To fix this issue and bring Sass in line with the CSS spec, we’re making changes in two phases:

Phase 1Phase 1 permalink

Compatibility:
Dart Sass
since 1.32.0
LibSass
Ruby Sass

Currently, Sass just emits a deprecation warning if you pass a number with no unit or a unit other than % as a lightness or saturation to any function.

Phase 2Phase 2 permalink

Compatibility:
Dart Sass
LibSass
Ruby Sass

In Dart Sass 2.0.0 color functions will throw errors if they’re passed a saturation or lightness parameter with no unit or a non-% unit.

AlphaAlpha permalink

When specifying a color’s alpha value, CSS (as of Colors Level 4) allows either unitless values between 0 and 1 or % values between 0% and 100%. In most cases Sass follows this behavior, but the functions color.adjust() and color.change() have historically allowed any unit, and interpreted it as unitless. You could even write color.change(red, $alpha: 1%) and Sass would return the opaque color red.

To fix this issue and bring Sass in line with the CSS spec, we’re making changes in three phases:

Phase 1Phase 1 permalink

Compatibility:
Dart Sass
since 1.56.0
LibSass
Ruby Sass

Currently, Sass just emits a deprecation warning if you pass a number with any unit, including %, as an alpha value to color.change() or color.adjust().

Phase 2Phase 2 permalink

Compatibility:
Dart Sass
LibSass
Ruby Sass

Next, we’ll change the way % units are handled for the alpha argument to color.change() and color.adjust(). Alphas with unit % will be divided by 100%, converting them to unitless numbers between 0 and 1.

Because this change is a bug fix that improves consistency with other Sass functions, it will be made with only a minor version bump. It will be changed at minimum three months after Phase 1 is released, to give users time to adjust their code and avoid the bug.

Phase 3Phase 3 permalink

Compatibility:
Dart Sass
LibSass
Ruby Sass

Finally, in Dart Sass 2.0.0 color.change() and color.adjust() will throw errors if they’re passed an alpha parameter with a non-% unit. Unitless alphas will still be allowed.

math.random()math.random() permalink

The math.random() function has historically ignored units in $limit and returned a unitless value. For example math.random(100px) would drop "px" and return a value like 42.

A future version of Sass will stop ignoring units for the $limit argument and return a random integer with the same units.

SCSS Syntax

@use "sass:math";

// Future Sass, doesn't work yet!
@debug math.random(100px); // 42px

Sass Syntax

@use "sass:math"

// Future Sass, doesn't work yet!
@debug math.random(100px)  // 42px

Phase 1Phase 1 permalink

Compatibility:
Dart Sass
since 1.54.5
LibSass
Ruby Sass

Currently, Sass emits a deprecation warning if you pass a $limit with units to math.random().

Phase 2Phase 2 permalink

Compatibility:
Dart Sass
LibSass
Ruby Sass

In Dart Sass 2.0.0, passing a $limit number with units will be an error.

Phase 3Phase 3 permalink

Compatibility:
Dart Sass
LibSass
Ruby Sass

In a minor release after Dart Sass 2.0.0, passing a $limit number with units to the math.random() function will be allowed again. It will return a random integer the same units as $limit, instead of a unitless number.

WeightWeight permalink

The color.mix() function and color.invert() function have both historically ignored units in their $weight arguments, despite that argument conceptually representing a percentage. A future version of Sass will require the unit %.

Phase 1Phase 1 permalink

Compatibility:
Dart Sass
since 1.56.0
LibSass
Ruby Sass

Currently, Sass emits a deprecation warning if you pass a $weight with no units or with units other than % to color.mix() or color.invert().

Phase 2Phase 2 permalink

Compatibility:
Dart Sass
LibSass
Ruby Sass

In Dart Sass 2.0.0, color.mix() and color.invert() will throw errors if they’re passed a $weight with no unit or a non-% unit.

IndexIndex permalink

The list.nth() function and list.set-nth() function have both historically ignored units in their $n arguments. A future version of Sass will forbid any units.

Phase 1Phase 1 permalink

Compatibility:
Dart Sass
since 1.56.0
LibSass
Ruby Sass

Currently, Sass emits a deprecation warning if you pass a $weight with no units or with units other than % to color.mix() or color.invert().

Phase 2Phase 2 permalink

Compatibility:
Dart Sass
LibSass
Ruby Sass

In Dart Sass 2.0.0, list.nth() and list.set-nth() will throw errors if they’re passed an index $n with a unit.

Can I Silence the Warnings?Can I Silence the Warnings? permalink

Sass provides a powerful suite of options for managing which deprecation warnings you see and when.

Terse and Verbose ModeTerse and Verbose Mode permalink

By default, Sass runs in terse mode, where it will only print each type of deprecation warning five times before it silences additional warnings. This helps ensure that users know when they need to be aware of an upcoming breaking change without creating an overwhelming amount of console noise.

If you run Sass in verbose mode instead, it will print every deprecation warning it encounters. This can be useful for tracking the remaining work to be done when fixing deprecations. You can enable verbose mode using the --verbose flag on the command line, or the verbose option in the JavaScript API.

⚠️ Heads up!

When running from the JS API, Sass doesn’t share any information across compilations, so by default it’ll print five warnings for each stylesheet that’s compiled. However, you can fix this by writing (or asking the author of your favorite framework’s Sass plugin to write) a custom Logger that only prints five errors per deprecation and can be shared across multiple compilations.

Silencing Deprecations in DependenciesSilencing Deprecations in Dependencies permalink

Sometimes, your dependencies have deprecation warnings that you can’t do anything about. You can silence deprecation warnings from dependencies while still printing them for your app using the --quiet-deps flag on the command line, or the quietDeps option in the JavaScript API.

For the purposes of this flag, a "dependency" is any stylesheet that’s not just a series of relative loads from the entrypoint stylesheet. This means anything that comes from a load path, and most stylesheets loaded through custom importers.

Silencing Specific DeprecationsSilencing Specific Deprecations permalink

If you know that one particular deprecation isn’t a problem for you, you can silence warnings for that specific deprecation using the --silence-deprecation flag on the command line, or the silenceDeprecations option in the JavaScript API.

⚠️ Heads up!

This option is only available in the modern JS API.